Chop, chop, choppin' on heaven's door.... That's a good description for the past couple of days. Pounding on the chisel until my arms gets sore - that sort of good time, you know?
The open mortises are a hair over 8" deep, and the hollow chisel gets me about 6" down, so the rest of the way is chopped and pared:
![]()
The above shows an open mortise in the kabuki. The 24mm timber slick got a good workout, as did my front delts. I divided up the work over a couple of days.
These are roughly cleaned out for the time being - the grunt work is done at least:
![]()
The nose pieces were even more onerous, as the open mortises are nearly 20" long:
![]()
Getting there - rough hacking and chopping completed:
![]()
Number 2 also through rough cutting of the open mortise:
![]()
A while later I had the upper pair of stub tenons mostly roughed out as well:
![]()
The other nose to the same stage:
![]()
Layout on the posts has led to mortising on the posts:
![]()
I think they call it 'post-modernism' - hah!
Just up to my armpits in resinous stinky POC chips:
![]()
Mortising from both sides left a 3/4" web in the middle of the 16" x 2.5" mortise, a web which I drilled and punched out in short order:
![]()
The above picture shows the inside face of the post, which will be met by the kabuki. I made a little note to myself to re-check the layout for the magusa's tenon - hence the '?' mark in the middle of the layout for that mortise.
The kabuki has moved along a bit - and it looks like time for clean up too:
![]()
All for today - I hope 2015 turns out to be a great year for one and all. Thanks for coming by the Carpentry Way. Onward to post 24
The open mortises are a hair over 8" deep, and the hollow chisel gets me about 6" down, so the rest of the way is chopped and pared:
The above shows an open mortise in the kabuki. The 24mm timber slick got a good workout, as did my front delts. I divided up the work over a couple of days.
These are roughly cleaned out for the time being - the grunt work is done at least:
The nose pieces were even more onerous, as the open mortises are nearly 20" long:
Getting there - rough hacking and chopping completed:
Number 2 also through rough cutting of the open mortise:
A while later I had the upper pair of stub tenons mostly roughed out as well:
The other nose to the same stage:
Layout on the posts has led to mortising on the posts:
I think they call it 'post-modernism' - hah!
Just up to my armpits in resinous stinky POC chips:
Mortising from both sides left a 3/4" web in the middle of the 16" x 2.5" mortise, a web which I drilled and punched out in short order:
The above picture shows the inside face of the post, which will be met by the kabuki. I made a little note to myself to re-check the layout for the magusa's tenon - hence the '?' mark in the middle of the layout for that mortise.
The kabuki has moved along a bit - and it looks like time for clean up too:
All for today - I hope 2015 turns out to be a great year for one and all. Thanks for coming by the Carpentry Way. Onward to post 24